WS10MS02

1, Can connect to 10 devices. 6 buttons and 3 message boxes for each device’s sub-panel. The message boxes are to response the device’s working status.

  可以連線10個元件。每個元件面板有6個按鍵和三個訊息格。訊息格是用以顯示該元件目前的工作狀態。

2, Enter IP address into the box between “Link” and “Unlink” buttons and click “Link”. In case of successful link, the box turns green and the type of product appears in the text box beside “Device #:”.

  在Link和Unlink按鍵中的方格中輸入IP位址，並且按“Link”。如果成功連線，IP位址方格會變綠，而且“Device #:”旁邊的文字方格會顯示產品的種類。

3, Use buttons to control the brightness/rotation of the device.

  使用按鍵來控制元件的亮度/轉動。

4, There are 2 buttons below to control all the devices at the same time, “Stop All Devices” and “Unlink All Before Exit”. Quitting the program without “Unlink” will cause the program unable to link the device next time.

  面板下面有兩個按鍵可以同時控制所有的元件，“Stop All Devices”和“Unlink All Before Exit”。離開程式而沒有Unlink該元件會造成下次啟動程式時，無法與該元件連接。

5, Two buttons “Save File Name” and “Save to File” are used to save current settings.

  兩個按鍵“Save File Name” 和 “Save to File”用來將現在的設定存入檔案之中。

6, Four buttons “Read File Name”, ”Read from File”, ”Link Selected” and ”Start” are used to read settings from a file, selectively link and run the settings.

  四個按鈕 “Read File Name”, ”Read from File”, ”Link Selected” 和 ”Start” 用來從檔案中讀出設定，選擇性Link和執行設定。

Download program 程式下載：WS10MS02A.rar  

This is the English version user manual : WS10MS02AUserGuideE1.pdf  

這是中文版的使用者手冊：WS10MS02AUserGuideC1.pdf  

The following is a video showing WS10MS02 operation.

下面是一段影片顯示WS10MS02的操作。