Auto Watering System [自動澆水器]

We offer 3 kinds of auto watering systems for irrigation of a small area of plants.

我們提供三種不同的自動澆水系統給小範圍的植物灌溉之用。

1, Direct Spay 直噴式

Put a Velcro tape on the water pump and attach the pump to the bottom of a water pool with a tilted spray angle (keep the control box away from water). Place the plants in a line of 2 meters and connect the power. The water pump works at once to spray water over the plants for around 30 seconds and It is done once in a day. Please see the below video. When the power is on, within 3 seconds, the up/down buttons could be used to increase/decrease the spray time.

把魔鬼氈黏在水邦浦，並以傾斜的噴水角度固定在水箱底下﹝避免控制盒碰到水﹞。把植物排成一列，約兩公尺，接上電源。水邦浦立刻開始工作，把水噴向植物，大約30秒的時間。每天一次自動澆水。請看下面的影片。電源打開之後三秒內，控制盒上的上/下按鍵可以用來增長/縮短噴水的時間。

2, A Long Pipe 長管式

The water pump is equipped with a 2.5-meter long 3/8” water pipe which has 30 spray holes from the end (a hole per 6 cm distance). Put the pump in the water pool, control box outside of the water, the long pipe around the plants and connect the power. The pump works at once to pump the water through 30 spray holes for around 20 seconds. It is done once in a day. Please see the below video. When the power is on, within 3 seconds, the up/down buttons could be used to increase/decrease the spray time.

水邦浦配備一條2.5公尺長的三分水管，而水管的末端開始每6公分鑽有一噴孔，總共有30個噴孔。把水邦浦放到水裡，控制盒置於水外，三分管繞行所有植物，然後接上電源。水邦浦立刻開始工作，把水打向30個噴孔，大約20秒的時間。每天定時澆水一次。請看下面的影片。電源打開之後三秒內，控制盒上的上/下按鍵可以用來增長/縮短噴水的時間。

3, A Spray Set 外加澆水套件

Purchase a 2/8” spray set from another company and connect to our water pump through the 3/8” to 2/8” pipe connector. Put the pump in the water pool, control box outside of the water, the spray set around the plants and connect the power. The pump works at once to pump the water through the spray set for around 20 seconds. It is done once in a day. Please see the below video. When the power is on, within 3 seconds, the up/down buttons could be used to increase/decrease the spray time.

向別家公司購買二分管的澆水套件，透過三分轉二分的接頭接到我們的水邦浦。把水邦浦放到水裡，控制盒置於水外，澆水套件繞行所有植物，然後接上電源。水邦浦立刻開始工作，把水打向澆水套件，大約20秒的時間。每天定時澆水一次。請看下面的影片。電源打開之後三秒內，控制盒上的上/下按鍵可以用來增長/縮短噴水的時間。

The spray procedure could be designed and re-programmed into the control box by users. The steps are as below:

使用者可以重新設計並下載新的澆水程序到控制盒中，以下就是步驟：

1, Download the command file 下載指令檔案

  For Direct Spray type 直噴式：

  For A Long Pipe and A Spray Set 長管式和外加澆水套件：

2, Study and change the command file 瞭解並修改指令檔案

  For Direct Spray type explanation 直噴式指令解釋：

  For A Long Pipe and A Spray Set explanation 長管式和外加澆水套件指令解釋：

3, Connect the control box to a WiFi AP 連接控制盒到一個WiFi分享器

4, Download WS10MS06 software 下載WS10MS06軟體

5, Run the software, read in command file and program into the control box 執行軟體、讀取指令檔案並燒入控制盒中

6, Turn off and on the power, the new procedure starts 重開電源，新程序就會開始執行

As for the detailed spec of the water pump, please refer to the product page of WiFi Pump.

至於有關水邦浦的詳細規格，請參考WiFi Pump的產品網頁。