WS10MS01

1, Can connect to 10 devices at the same time.

  可以同時連線10個元件。

2, On each device’s sub-panel, there are 7 buttons and 3 message boxes (colored box).

  每一個元件的小面板中，有7個按鍵和3個訊息格﹝有顏色的方格﹞。

3, The 3 message boxes are to response the device’s working status.

  三個訊息格是用以顯示該元件目前的工作狀態。

4, Enter IP address into the box between “Link” and “Unlink” buttons and click “Link”. In case of successful link, the box turns green and the type of product appears in the text box beside “Device #:”.

  在Link和Unlink按鍵中的方格中輸入IP位址，並且按“Link”。如果成功連線，IP位址方格會變綠，而且“Device #:”旁邊的文字方格會顯示產品的種類。

5, Use buttons to control the brightness/rotation of the device.

  使用按鍵來控制元件的亮度/轉動。

6, There are 2 buttons below to control all the devices at the same time, “Stop All Devices” and “Unlink All Devices Before Exit”. Quitting the program without “Unlink” will cause the program unable to link the device next time.

  面板下面有兩個按鍵可以同時控制所有的元件，“Stop All Devices”和“Unlink All Devices Before Exit”。離開程式而沒有Unlink該元件會造成下次再啟動程式時，無法與該元件連接。

Download program 程式下載：WS10MS01B.rar  

This is the English version user manual : WS10MS01AUserGuideE1.pdf  

這是中文版的使用者手冊：WS10MS01AUserGuideC1.pdf  

The following is a video showing WS10MS01 operation.

下面是一段影片顯示WS10MS10的操作。